Re: gEDA: Re: gEDA-user: netlister problem (increase number of rename_pairs)

[sdb-at-NOSPAMcloud9_dot_net (Stuart Brorson)]

Hmmm. . . .

We can talk about this at Free Dog this evening, and then perhaps I'll
update CVS afterwards, depending upon what Ales thinks . . . . 

Stuart

> 
> No, I tried that increasing both of the dimensions of the rename_pairs
> variable by a factor of 10.  I also compiled the CVS geda but that
> didn't help.
> 
> Finally I found this post on the devlist (which is why I'm cross
> posting) that fixed the problem
> (http://www.mail-archive.com/geda-dev@seul.org/msg03934.html) and now
> it is netlisting my board like a pro.  Could someone with more skill
> consider uploading it to CVS?
> 
> Thanks,
> James
> 
> On 7/7/05, Stuart Brorson <sdb@cloud9.net> wrote:
> > It looks to me like you just need to go into gnetlist/src, and edit
> > the file s_rename.c.  Change the line
> >=20
> > #define MAX_RENAME 64
> >=20
> > to
> >=20
> > #define MAX_RENAME 256
> >=20
> > (or some such number).  Then recompile & reinstall.
> >=20
> > HTH,
> >=20
> > Stuart
> >=20
> >=20
> > >
> > > I have a very strange error.  I have a hierarchical schematic, and I'm
> > > trying to wire up the power and ground to the blocks.  I have four
> > > blocks with various ground pins having different names (GND, AGND,
> > > DGND) and when I connect all of their grounds together and run
> > > gsch2pcb I get
> > >
> > > $ gsch2pcb projectrc
> > > Increase number of rename_pairs (MAX_RENAME) in s_rename.c
> > > Increase number of rename_pairs (MAX_RENAME) in s_rename.c
> > > gsch2pcb: gnetlist command failed.
> > >     At least gnetlist 20030901 is required for m4-xxx options.
> > >
> > > When I break any of those ground connections so only have 3 blocks
> > > connected the error goes away.  I tried recompiling increasing both
> > > dimensions of that array by 10 and the problem is persisting.
> > >
> > > I have uploaded the files to http://www.limeybrit.com/eeg.sch.  The
> > > problem block is analog.sch and the project file is projectrc.  Thank
> > > you for any advice!
> > >
> > > James
> > >
> >=20
> >
>