Mail Thread Index

• Date Index

• Re: gEDA-user: [PATCH 0/4][PCB] Color setting updates, DJ Delorie
  • <Possible follow-up(s)>
  • Re: gEDA-user: [PATCH 0/4][PCB] Color setting updates, Ben Jackson
  • Re: gEDA-user: [PATCH 0/4][PCB] Color setting updates, Kai-Martin Knaak
    • Re: gEDA-user: [PATCH 0/4][PCB] Color setting updates, Steven Michalske
• Re: gEDA-user: Icarus Verilog: How to exit simulator with non-zerostatus?, Patrick Doyle
  • Re: gEDA-user: Icarus Verilog: How to exit simulator withnon-zero status?, Larry Doolittle
    • Re: gEDA-user: Icarus Verilog: How to exit simulator with non-zerostatus?, Stephen Williams
      • Re: gEDA-user: Icarus Verilog: How to exit simulator with non-zerostatus?, Patrick Doyle
• Re: gEDA-user: single-sided boards, Kai-Martin Knaak
  • Re: gEDA-user: single-sided boards, Ineiev
    • Re: gEDA-user: single-sided boards, Kai-Martin Knaak
  • Re: gEDA-user: single-sided boards, David SMITH
    • Re: gEDA-user: single-sided boards, Dan McMahill
    • Re: gEDA-user: single-sided boards, John Luciani
• Re: gEDA-user: Grid Units in schematic editor, Alex Huntley
  • Re: gEDA-user: Grid Units in schematic editor, Kai-Martin Knaak
    • Re: gEDA-user: Grid Units in schematic editor, DJ Delorie
  • <Possible follow-up(s)>
  • Re: gEDA-user: Grid Units in schematic editor, Alex Huntley
• gEDA-user: PCB Build Errors, Bob Paddock
  • Re: gEDA-user: PCB Build Errors, DJ Delorie
    • Re: gEDA-user: PCB Build Errors, Bob Paddock
      • Re: gEDA-user: PCB Build Errors, DJ Delorie
      • Re: gEDA-user: PCB Build Errors, Bob Paddock
      • Re: gEDA-user: PCB Build Errors, DJ Delorie
      • Re: gEDA-user: PCB Build Errors, Bob Paddock
      • Re: gEDA-user: PCB Build Errors, DJ Delorie
      • Re: gEDA-user: PCB Build Errors, Dan McMahill
      • Re: gEDA-user: PCB Build Errors, Ales Hvezda
• Re: gEDA-user: Using .global statements in GNUcap and multtransistors, al davis
  • Re: gEDA-user: Using .global statements in GNUcap and multtransistors, r
    • Re: gEDA-user: Using .global statements in GNUcap and multtransistors, al davis
      • Re: gEDA-user: Using .global statements in GNUcap and multtransistors, r
      • Re: gEDA-user: Using .global statements in GNUcap and multtransistors, al davis
      • Re: gEDA-user: Using .global statements in GNUcap andmult transistors, Dan McMahill
  • Re: gEDA-user: Using .global statements in GNUcap andmult transistors, John P. Doty
    • Re: gEDA-user: Using .global statements in GNUcap andmult transistors, al davis
• gEDA-user: gnucap tranient response (noisy nodes), Yamazaki R2
  • Re: gEDA-user: gnucap tranient response (noisy nodes), al davis
• gEDA-user: way to 'save symbol as' ?, Josh Jordan
  • Re: gEDA-user: way to 'save symbol as' ?, John Doty
• gEDA-user: pcb segmentation fault, Levente Kovacs
  • Re: gEDA-user: pcb segmentation fault, Levente Kovacs
    • Re: gEDA-user: pcb segmentation fault, DJ Delorie
      • Re: gEDA-user: pcb segmentation fault, Ineiev
      • Re: gEDA-user: pcb segmentation fault, Peter Clifton
      • Re: gEDA-user: pcb segmentation fault, DJ Delorie
      • Re: gEDA-user: pcb segmentation fault, Peter Clifton
      • Re: gEDA-user: pcb segmentation fault, DJ Delorie
      • gEDA-user: Thindraw and the HID interface... [WAS: Re: pcbsegmentation fault], Peter Clifton
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcbsegmentation fault], DJ Delorie
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcbsegmentation fault], Peter C.J. Clifton
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re:pcb segmentation fault], John Griessen
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcbsegmentation fault], Steven Michalske
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re:pcb segmentation fault], Peter C.J. Clifton
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcbsegmentation fault], Steven Michalske
      • Re: gEDA-user: Thindraw and the HID interface... [WAS: Re:pcb segmentation fault], Peter C.J. Clifton
      • Re: gEDA-user: Thindraw and the HID interface... [WAS:Re: pcb segmentation fault], John Griessen
      • Re: gEDA-user: Thindraw and the HID interface... [WAS:Re: pcb segmentation fault], Steven Michalske
• gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
  • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Peter Clifton
    • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
  • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, DJ Delorie
    • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, DJ Delorie
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, DJ Delorie
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, DJ Delorie
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Dan McMahill
      • Re: gEDA-user: PCB, configure: error: batch is not a valid gui, Stefan Salewski
• gEDA-user: Home PCB and Liquid Tin, Rob Butts
  • Re: gEDA-user: Home PCB and Liquid Tin, DJ Delorie
    • Re: gEDA-user: Home PCB and Liquid Tin, John Luciani
      • Re: gEDA-user: Home PCB and Liquid Tin, Stuart Brorson
      • Re: gEDA-user: Home PCB and Liquid Tin, Rob Butts
      • Re: gEDA-user: Home PCB and Liquid Tin, evan foss
      • gEDA-user: OT: You-Blew-It Electronics (was: Re: Home PCB andLiquid Tin), Stuart Brorson
      • Re: gEDA-user: OT: You-Blew-It Electronics (was: Re: Home PCB andLiquid Tin), evan foss
• gEDA-user: TQFP adapter, Rob Butts
  • Re: gEDA-user: TQFP adapter, DJ Delorie
    • Re: gEDA-user: TQFP adapter, Rob Butts
      • Re: gEDA-user: TQFP adapter, DJ Delorie
• Re: gEDA-user: geda-user Digest, Vol 34, Issue 18, Yamazaki R2
• Re: gEDA-user: Using .global statements in GNUcap and mult, Yamazaki R2
  • Re: gEDA-user: Using .global statements in GNUcap and mult, John Doty
    • Re: gEDA-user: Using .global statements in GNUcap and mult, John Doty
  • Re: gEDA-user: Using .global statements in GNUcap and mult, al davis
• gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
  • Re: gEDA-user: What is the current procedure and location tosubmit patches for PCB?, DJ Delorie
    • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
      • Re: gEDA-user: What is the current procedure and location tosubmit patches for PCB?, DJ Delorie
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
      • Re: gEDA-user: What is the current procedure and location tosubmit patches for PCB?, DJ Delorie
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
      • Re: gEDA-user: What is the current procedure and location tosubmit patches for PCB?, DJ Delorie
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Larry Doolittle
      • Re: gEDA-user: What is the current procedure and locationto submit patches for PCB?, DJ Delorie
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Dave N6NZ
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Dan McMahill
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Mark
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Peter Clifton
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Bob Paddock
    • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Peter Tyser
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, DJ Delorie
      • Re: gEDA-user: What is the current procedure and location to submitpatches for PCB?, Peter Tyser
      • Re: gEDA-user: What is the current procedure and location tosubmit patches for PCB?, Kai-Martin Knaak
• gEDA-user: ps.c alignment lines multiplies by zero?, Bob Paddock
  • Re: gEDA-user: ps.c alignment lines multiplies by zero?, DJ Delorie
    • Re: gEDA-user: ps.c alignment lines multiplies by zero?, Bob Paddock
      • Re: gEDA-user: ps.c alignment lines multiplies by zero?, DJ Delorie
• gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Shakthi Kannan
  • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Stefan Salewski
    • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, DJ Delorie
  • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Dan McMahill
    • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Shakthi Kannan
      • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Peter Clifton
      • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Shakthi Kannan
      • Re: gEDA-user: Cannot find gdk-pixbuf, building gaf from source, Shakthi Kannan
• gEDA-user: GSchem in CMOS Analog IC context?, daledouglas
  • Re: gEDA-user: GSchem in CMOS Analog IC context?, Stuart Brorson
    • Re: gEDA-user: GSchem in CMOS Analog IC context?, John Doty
  • <Possible follow-up(s)>
  • Re: gEDA-user: GSchem in CMOS Analog IC context?, daledouglas
    • Re: gEDA-user: GSchem in CMOS Analog IC context?, John Doty
• gEDA-user: pcb- no library dialog window on startup, Josh Jordan
  • Re: gEDA-user: pcb- no library dialog window on startup, Peter Clifton
  • <Possible follow-up(s)>
  • Re: gEDA-user: pcb- no library dialog window on startup, Josh Jordan
    • Re: gEDA-user: pcb- no library dialog window on startup, Peter TB Brett
  • Re: gEDA-user: pcb- no library dialog window on startup, Josh Jordan
• gEDA-user: Is it possible to run a command from the toolbar ingschem such as this? (Screenshot), Yamazaki R2
  • Re: gEDA-user: Is it possible to run a command from the toolbar ingschem such as this? (Screenshot), Peter Clifton
• gEDA-user: How to fit REFDES on PCB with Hierarchy, gene
  • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Kai-Martin Knaak
  • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, John Luciani
    • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Gabriel Paubert
      • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Steven Michalske
      • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Gabriel Paubert
  • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Peter Clifton
    • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, John Griessen
      • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Larry Doolittle
      • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, John Doty
  • Re: gEDA-user: How to fit REFDES on PCB with Hierarchy, Ben Jackson
• gEDA-user: gschem 1.4.3 and LINGUAS="de en", Stefan Salewski
• Re: gEDA-user: Is it possible to run a command from the from thetoolbar in gschem such as this? (Screenshot) (Peter Clifton), Yamazaki R2
  • Re: gEDA-user: Is it possible to run a command from the from thetoolbar in gschem such as this? (Screenshot) (Peter Clifton), Peter Clifton
• gEDA-user: spirals challenge, DJ Delorie
  • Re: gEDA-user: spirals challenge, Bob Paddock